Aquatic Weed Harvester Specifications
reKVR
Aquatic Weed Harvester Boat
Specifications
reKVR ‐ is the newest generation of a aquatic weed harvesters. The reKVR is manufactured from aluminum, allowing it to be light, durable, and low operation maintenance. It can operate in a 10‐inch draft and carry more than 2000 pounds of product.
The reKVR utilizes its advanced hydraulics system for daily operations and a proven Kohler engine for its powerplant. It has inset aluminum paddle wheels, allowing the reKVR to maneuver close to docks and shorelines for efficient water cleanup. The reKVR can lower its cutting head down approximately 4 feet, allowing the cutting edges to harvest while utilizing the rear conveyor for an effective offloading.
The reKVR is built to be operated by a single operator from trailering to harvesting, allowing a low operation cost. The reKVR is made and assembled in America.
-
Width: 86”
-
Length: 211"
-
Height: 80"
-
Weight: approximately 2200 LBS
-
Cutting head depth: 48"
-
Eaton Hydraulics, 3‐year warranty
-
15‐gallon aluminum hydraulic reservoir, using biodegradable and USF&W approved hydraulic fluid
-
Hydrogear paddlewheel propulsion, 2‐year warranty
-
Kohler PA‐ECH730‐3006, Kohler engines warranty
-
Horsepower: 23
-
Cooling: Air
-
Fuel Type: Gasoline/(optional) HP Propane
-
Trailer: Custom built for easy load and unload of the re KVR.
-
Width: 96”
-
Length: 22’
-
Weight: 800
-
Ball size: 2 5/16 "
-
Aluminum Turf Trailer: Trailer manufactured with aluminum instead of steel and adding turf tires, making it lite for sensitive grass
-
Tower Canopy: 40" wide collapsible canopy gives you protective shade and keeps you comfortably cool when working on the water.
-
Shade rotates 180°
-
Sturdy Frame: Zinc‐plated steel frame resists corrosion for added durability
-
Rain Protection: Canvas canopy is water‐resistant to keep you dry in wet weather
Lights: Adds two light bars (front and rear facing) that are marine grade lights and a larger battery for more power allowing operations in low lighted areas.
Stainless Steel Belting: Upgrading the standard galvanized conveyer belt to stainless steel.
Sound Reducer Enclosure: Sound reducing material is placed around the engine allowing quieter operations.
Herbicide Application Spray Kit: A polyethylene tank with a 12‐volt diaphragm pump can pump up to 2.1 gpm. Spray nozzles are added to the cutting head, allowing for herbicide spraying while operating the reKVR.
H-8
Aquatic Weed Harvester Boat
Specifications
8-Foot Wide – 6 Foot Deep Cutting Area
Eaton Hydraulic Motors Rock Guard Protected Cutting Teeth
Stainless Steel Hydraulic Lines
260-Cubic-Foot Storage Capacity Hydraulically Retractable Paddle Wheels
Electronic Engine Control
All Steel Constructed Multi-Compartmental Hull
Non-Slip Decking
Devoe Devthane Marine Paint
Easily Trailerable
Tuff Coat Lower Hull Protection
Kubota 4-Cylinder Motor
Impact Absorbing Harvesting Head
Dimensions:
Length (OAL) 30′ – 6″
Width (Transport) 8′ – 6″
Width (Operating) 13′ – 0″
Height (Shipping) 8′ – 4″
Flotation:
Weight 6900 lbs.
Hull Dimensions 21′ – 6″ x 8′ – 6″ x 20″
Water Tight Compart. 5
Draft (Empty) 6″
Draft (Max. Load) 20″
Load Container:
Length 20′ – 6″
Width 4′ – 5″
Loading Height 2′ – 8″
Maximum Volume Ht. 3′ – 6″
Maximum Weight 11,000 lbs.
Unloading Height 0-54″
– hydraulically adjusted
Unloading Speed 45 sec.
Power Pack:
Engine Kubota Water-cooled, 4 cyl. Model V1505 T E3B
Engine Specs. 44 HP Tier 4 Interim – HP @ 3,000 RPM
Hydraulic Pump 33 GPM
Hydraulic Reservoir 21 US gal.
Fuel Tank Capacity 21 US gal.
Harvesting Head:
Cutting Width 8′-0″
Cutting Depth to 6′-6″
Horizontal Knives 3″
Vertical Knives 3″
Hydraulic Reservoir 21 US gal.
Fuel Tank Capacity 21 US gal.
Propulsion:
Dual Independently Reversible Paddle Wheels
Hydraulically Driven and Retractable (DxW) 50″ x 24″ with Variable RPM
Get the Latest Aquatic Weed Harvester Design to Keep Your Golf Course, Marinas, Ponds and waterways clear of harmful, aquatic weeds
PMC Aquatics, LLC
Specialized Water Management Machinery Manufacturer of Aquatic Weed Harvesters for Clean Waterways Since 1990
PMC Aquatic Weed Harvesters are very stable and many are still in operation for over 20 years. Made in the USA.
Protect your waterways. Get the Latest equipment available
contact pmc aquatics, llc